Why Is K20 Head On K24?

Is K20 better than K24?

For most street applications, the K20 provides more than enough power to push a lightweight Honda around.

For those who want more low-end torque and more over-all power, the K24 is the better choice if you’re willing to pay for it..

How much does a K24 swap cost?

We Finish This Accord-Based K24 Swap And Save $3,600!PARTTYPICAL COSTSAVINGSEngine$2,500$2,100Transmission$1,000$650ECU$250$100Wire harness$250$1505 more rows•Jul 13, 2010

Are K20 engines good?

K20 Overall Reliability Nonetheless, we want to reiterate that the K20 is a highly reliable engine. It shouldn’t have any major issues on the road to 200,000+ miles. Some K20 owners won’t experience any of the issues we referenced in this post.

What K24 engine is the best?

K24A2. The K24A2 typically earns the title of the most impressive K24 engine out of the factory, but it’s also gained a pretty high price tag because of this, which makes other variations more tempting if you’re not shy when it comes to tuning.

How can I improve my K24 engine?

Best K24 modifications The intake & exhaust durations will alter depending on the chosen camshaft profile, so large bhp gains are on offer for camshaft upgrades. Fast road camshafts normally boost the bhp and torque across the rpm range, you could drop a little low end bhp but your high end rpm power will be better.

What’s better K24A vs K24A2?

Like the North American-spec K24A2, the K24A shares a similar design yet produces slightly less power and slightly more torque, and like the K24A2, the K24A features a drive-by-wire throttle body and a modest, 10.5:1 compression ratio.

Is K24 engine good?

This may be a bit repetitive, but the K24 is truly an excellent, reliable engine. It spans a long period of time and is found in many different Honda and Acura models. The 3 most common problems include front main seal oil leaks, exhaust cam galling, and timing chain tensioner failure.

How much taller is a K24?

The K24 is going to be about 3/4″ taller.

What’s better k20a2 or k20z3?

the k20a2 is the one you want. both are ivtec, but the k20a2 head is more like the b series vtec. the k20z3 ivtec is built for more fuel economy.

How much HP can K24 handle?

The max flow on a K24 is rated around 37lbs/minute. You can expect about 370 hp at the crank (give or take) when the K24 is pushed to the limit. Of course you can try to push past this limit, but you will hit the point where you run into diminishing returns.

How much HP can K20 handle?

The K20 motor can handle about 318-326hp with no problem. But if you want more hp change out the rods and pistons.

Which K24 is best for boost?

The best combination for good power and good torque would be the k20/k24 head and block combination.

What’s better k20 or b18?

Also b18c is much better for daily driving in ek. K20 has a lot noises to the interior. So if you have a small budget and your car is for daily drive b18c > k20. If you want a track car and you can afford the k swap go for k20.

Does K20 header fit K24?

The K20 header mount does not reach the K24 header rubber mount so this was left off. I’m sure a custom mount could be made but there have been others who have left with off with no problems. Plus the whole exhaust mounted up provides enough support.

How much power does a K20 K24 make?

166 hp @ 5800 rpm and 161lb trq @ 4000 rpm. Equipped with an electronic throttle body, this motor does not use the conventional VTEC mechanism but does have VTC.

Add a comment